 |
Del Fatti Leather
|
Matt Del Fatti has been handcrafting fine concealment leather since 1978. A one-man shop, he hand cuts the finest leather for each holster. The nuances of his designs have been influenced by carrying a gun daily during his 27-year career as a law enforcement officer. Matt is an Associate Member of the American Pistolsmiths Guild.
*Please contact us for availability and pricing.
Click on thumbnails for a larger view.
|
SLP The SLP has a reinforced mouth and is designed to work well as a range or concealment holster. |
||
|
|
|
|
|
Black P.O.R. |
Brown P.O.R. |
Cordovan P.O.R. |
|
LP-HTL This system enables the holster to ride as low on the belt as possible and the deeper wings work to stabilize short muzzle pistols. |
||
|
|
|
|
|
Black P.O.R. |
Brown P.O.R. |
Cordovan P.O.R. |
|
LPS NEW! Matt Del Fatti designed this holster as a combination of the LP-HTL and the LP-QS double snap (discontinued). It also draws on the belt loop concept of Tony Kanaley's (Milt Sparks) Axiom. The snaps on the front of the holster allow for quick mounting and dismounting from the belt. They are arranged in pairs to provide some redundant security and also prevent any outboard rotation of the loops when being worn. This holster has a reinforced mouth. |
||
|
|
|
|
|
Black P.O.R. |
Dark Brown P.O.R. |
Cordovan P.O.R. |
|
ISP-LP An inside-the-pants style holster designed for a smooth comfortable carry with a reinforced holster mouth. Attaches to the belt using snapped straps. |
||
|
|
|
|
|
Black P.O.R. |
Brown P.O.R. |
Cordovan P.O.R. |
|
ISP-4 An inside the pants style holster designed to minimize the rotational torque felt when wearing a short barreled pistol with a heavy butt such as an HKP7M13. Available with non rotating snapped straps. |
||
|
|
|
|
|
Black P.O.R. |
Brown P.O.R. |
Cordovan P.O.R. |
|
SR Includes horizontal ride holster with thumb snap (spring release available for Glocks) horizontal or angled ride double magazine carrier with tension screws and adjustable harness.. |
||
|
|
|
|
|
Black P.O.R. |
Brown P.O.R. |
Cordovan P.O.R. |
|
Single Magazine Pouch |
||
|
|
|
|
|
Black P.O.R. |
Brown P.O.R. |
Cordovan P.O.R. |
|
N-frame Speedloader Pouch |
J-frame Speedloader Pouch |
|
|
 |
|
Black, brown and cordovan shown. Fits HKS speedloaders. P.O.R. |
Black, brown and cordovan shown. Fits HKS speedloaders. P.O.R. |
|
Z2/Z3 Flashlight Carrier |
|
|
|
Black (top), brown (left) and cordovan (right) shown. P.O.R. |
|
Belts are available in 1.25" and 1.5" widths, even sizes, in black, cordovan or brown finishes. Belts larger than 45" available at additional cost. *Please review the belt measuring instructions following the belt pictures. |
|
|
|
 |
|
Black P.O.R. |
Cordovan P.O.R. |
|
Belt Sizing
Many customers assume that their waist size for pants is the same as their belt measurement. This isn't usually the case. In order to make sure that you get a belt that fits you, please measure a belt you currently wear. If you already have a heavy belt, and are going to be wearing the same type of holster on your new belt as the old one, it's just a straight measurement. If, on the other hand, you currently wear a thin dress belt and don't wear a holster on it you'll probably want to add an inch or two (depending on your pistol) to the length. Measure from where the leather bends around the base of the buckle down the belt to the hole you use. Add length to that figure if the last part of the above paragraph applies. Whatever length you decide on will become the middle hole of five on your new belt. |
|
